header
PowerWalker
Product Description

Return to main page

PowerWalker VFI 40K CPG 3/3 BI



Datasheet

Manual

Software

Compare

Print page
  • 3-level inverter topology for increased efficiency and high power density
  • Parallel operation up to 3 units
  • Built-in backfeed protection
  • Optional Isolation Transformer for full isolation and complete noise rejection

Item Number: 10122060

The PowerWalker VFI CPG 3/3 series is a professional commercial solution built in double conversion technology with power factor 0.9. Equipped with three-level inverter topology, it results in high efficiency reaching 95% in Line Mode and even 98% in ECO Mode. The series ensures low harmonic distortions and precise voltage regulation (1%). All phases have Active Power Factor Correction.

Thanks to its modern design, the VFI CPG series reaches a very high power density (kVA output in relation to the size/volume of the unit). All models of this series offer generator support, communication ports for SNMP, USB and RS-232 and allow parallel operation up to three units.

For this model battery numbers can be adjusted (between 32 and 40pcs), allowing more flexibility and compatibility with existing battery banks. The three stage extendable charging design also enhances battery performance over its life time.
For safety reasons this series has been equipped with backfeed protection (reverse feed) in order to avoid power transfer to the input terminal in case of mains failure.
header

Technical specification

General features
TypeOnline
Power capacity40000VA / 36000W
Output Power Factor0.90
Input
Input Voltage Range305-478 VAC (3-phase) @100% load
190-520 VAC (3-phase) @50% load
Input PF≥ 0.99 at full load
Frequency Range46Hz - 54Hz or 56Hz - 64Hz
Frequency (Synchronized Range)46Hz - 54Hz or 56Hz - 64Hz
Output
Nominal Output Voltage3x 400V (3Ph+N); (208)/220/230/240VAC(Ph-N)
Pure Sine WaveYes
THDv≤2% Full Linear Load; ≤5% Non-Linear Load
Voltage Regulation (Bat. Mod.)±1%
Frequency (Battery Mode)±0,1Hz
Parallel WorkUp to 3 of the same size
Technical details
Load Crest Ratio3:1 (max)
Transfer Time [AC to Battery]0ms
Transfer Time [Inverter to Bypass]0ms (typical, max 4ms)
Transfer Time [Inverter to ECO]10ms
Generator supportYes
Overload CapacityLine: 10min @100%-110%; 1min @110%-130%; 1s @>130%; BAT: 30s @100%-110%; 10s @110%-130%; 1s @>130%
External Battery ConnectionYes
Charger2A
Fan LogicAlways on, automatic speed control
Efficiency
LINE mode full Load95.0%
BATTERY mode full Load92.0%
Batteries and autonomy time
Batteries2x32x 12V/9Ah
DC Voltage32 x 12V
Recharge Time9h to 90%
Connections and communication
Terminal Output1
InputTerminal
SoftwareViewPower
USB portYes
RS-232 PortYes
Extension SlotYes, 1
EPO PortYes
Environment
Noise Level< 70dB
Temperature0°C – 40°C
Humidity0% - 95% RH (non-condensing)
Logistics
IEC 62040-3 classificationVFI-SS-111
Manual LanguagesEN
EAN4260074978773
Width300 mm
Height1000 mm
Depth815 mm
Weight250 kg
Pcs. per box1

header

Accessories

NameProduct DescriptionPicture
SNMP Manager
Network Management
Item Number: 10120505
EAN: 4260074974034
SNMP Cards offer IP Address and Web Interface for most convenient monitoring. SNMP modules allows remote monitor and manage multiple UPSs from anywhere with internet access. Integrated web access will leverage internet capability of SNMP card to remotely program or shut down UPSs. Equipped with SNMP card, power conditions of all UPSs can be monitored anytime/anywhere even through the UPS units are ...
EMD for SNMP Manager
Environment Module
Item Number: 10120544
EAN: 4260074974966
EMD (environmental monitoring device) for SNMP cards are connectivity devices to remote monitor temperature and humidity via SNMP card. It provides dry contacts to communicate with compatible devices such as security system or alarm system. ...
AS400 Card
Dry Contacts
Item Number: 10120515
EAN: 4260074974300
AS/400 Cards provide clean dry contacts for remote shutdown and monitoring of a UPS.
It is frequently used along with PLCs and signal control panels.
Information delivered are UPS failure, Alarm, Main Fail, Bypass, Battery Low, UPS On.
Using AS/400 it possible to shutdown UPS remotely.
Solution requires external 12V/24VDC source for a high signal.
Pin assignment is available in User ...
BPH C384T-64+4A
for VFI CPG 3/3
Item Number: 10135030
EAN: 4260074980097
Battery Pack for CPG 30/40K with 2*4A charger, 64x9Ah battery
Dimensions: 800(D)*250(W)*833(H) mm
Weight: approx. 55kgs without batteries
UPS uses 3-pin Anderson connector ...
BP C384T-64x9Ah+4A
for VFI CPG 3/3
Item Number: 10134035
EAN: 4260074980103
Battery Pack for CPG 30/40K with 2*4A charger, 64x9Ah battery
Dimensions: 800(D)*250(W)*833(H) mm
Weight: approx. 55kgs without batteries
UPS uses 3-pin Anderson connector ...




PowerWalker is a brand of BlueWalker GmbH
BlueWalker GmbH, Hellersbergstrasse 6, 41460 Neuss, Germany
Office: +49 2131 206 17 59 ⚫ Hotline: +49 2131 206 17 58 ⚫ Fax: +49 2131 206 17 57
© 2017 BlueWalker GmbH. All Rights Reserved.

en : Uninterruptible power supply (UPS)

bg : Непрекъсваемо захранване

de : Unterbrechungsfreie Stromversorgung (USV)

dk : Uafbrudt Strømforsyning

el : Αδιάλειπτη παροχή ενέργειας

es : Sistema de alimentación ininterrumpida (SAI)

et : Puhvertoiteallikas

fr : Alimentation sans interruption (onduleur)

hu : Szünetmentes tápegység

id : Suplai daya bebas gangguan

it : Gruppo di continuità

ms : Bekalan tenaga berterusan

nl : Noodstroomvoeding

pl : Zasilacz awaryjny

pt : Fonte de alimentação ininterrupta

ru : Источник бесперебойного питания (ИБП)

sk : Neprerušiteľný zdroj energie

sr : Непрекидно напајање

sv : Avbrottsfri kraftförsörjning

tr : Kesintisiz güç kaynağı

uk : Джерело безперебійного живлення